KATAOKA & Co.,Ltd.
This sharpener is capable of rough grinding, medium grinding and finish grinding.
Our sharpener enables to sharpen cutlery with water. Pour water in the grinding section, insert a knife into the grinding groove perpendicularly and move in cross direction just 7-8 times only.
The handle section is designed so that a knife blade would not touch with your hand during sharpening.
How to use
1.Pour water in the sharpener (grinding section).
2.Grasp the handle section tightly so that the grind section would not move.
3.Grind first with blue stone and then, move to 2nd white stone. Final finishing grind is pink stone to be used. Press the knife lightly and move respectively 8 times.
4.If not succeeded to sharpen properly, back to 1st blue stone and repeat again to 2nd and 3rd stones.
5.Wash the knife blade with water after grinding.
Materials/
Body:ABS resin (Rubber paint) Heat resisting temp/Body:80°C. (Thermal deformation temp.80°C.)
Whetstone:Alumina ceramics Coarse whetstone/PWA#100. Medium whetstone/PWA#180 Finish whetstone/PWA#400
"Available for Rough Sharpening and Finish Sharpening" for your proper use!
Safety design for the handle section free frome danger while sharpening.
Easy to clean the whetstones with water! Just take off the cover.
This water sharpening method prevents the sharpening groove from clogging. Respective ceramic whetstones are fastened aslant against the sharpening grooves and enable to sharpen effectively.
How to use
1.Pour water in the sharpner(grinding section).
2.Grasp the handle section tightly so that the grind section would not move.
3.Grind first with white stone. Final finishing grind is pink stone to be used. Press the knife lightly and move respectively 8 times.
4.If not succeeded to sharpen properly, back to 1st white stone and repeat again to finish pink stone.
5.Wash the knife blade with water after grinding.
Materials/
Body: ABS resin Cover:AS resin Heat resisting temperature:120°C. Coldresistance temperrature:-20°C. (Deforming temperature:80°C.)
Whetstone:Alumina ceramics Coarse whetstone/PWA#180. Finishing whetstone/PWA#400
The whetstone won't slip as it is fitted with a universal disassembly non-slip stand.
Distinguished in sharpening the stainless steel knife. Not require to water the whetstone prior to use. Try to sharpen whenever you need.
Aluminum system carbonaceous abrasive is used and is distinguished in sharpening and cutting quality.
